nOm

uninstall drivers from control panel (best to use driverclaener tbh) reboot, reinstall

psu should be fine…post the code of the hiper i’ll check for definite 😉

if it were me id get…..
(from overclockers, the help on the forums is immense)

Gigabyte GA_965P_DS3 (Socket 775) PCI-Express DDR2 Motherboard
(£82.24) £69.99

Intel Core 2 DUO E6300 “LGA775 Allendale” 1.86GHz (1066FSB) – Retail
(£119.84) £101.99

OCZ 2GB (2 x 1GB) PC2-6400 Dual Channel Platinum Revision 2 XTC Series DDR2 (OCZ2P800R22GK)
(£113.96) £96.99

Sapphire ATI Radeon X1950 Pro ULTIMATE SILENT 256MB GDDR3 HDTV/Dual DVI (PCI-Express) – Retail
(£140.99) £119.99

Seagate Barracuda 7200.10 320GB ST3320620A ATA-100 16MB Cache – OEM
(£66.96) £56.99

Sub Total : £445.95
Shipping cost assumes delivery to UK Mainland with:
City Link Parcel Next Day (Delivered Mon-Fri)
(This can be changed during checkout) Shipping : £8.95
Vat : £79.61

Total : £534.51

keep existing case and psu…maybe get a 512gfx card…the 6300 should hit 3g without much of a prob…..the seagate drive is almost as fast as a rapter….dont buy an os as i have the student/teacher addition which requires no fecking around..pm me ill post it to ya….couple of hundred quid to get a laptop on ebay in case you feck up
😀

the 6600 is a lot of money tbh, and the DS3 mobo and 6300 are the perfect match…..i followed the thread in overclockers for the DS3 in the mobo section and had my lads at 3g no prob, within an hour, could prob push for 3.2/3.4.

i would seriously think about building your own, become a member of overclocker forums and ask them to spec you a system……..have fun

http://forums.overclockers.co.uk/

😀 😀

edit* i got over a £100 for my 6800gt on ebay so your looking at getting back a £150/200 😉

out now 😀

we got a few wierdos, hampster 8)

@Wipers wrote:

Hmmm – last night we all had to get nOm to move us a different channel – him being logged in as admin….

❓

i didna move anybody 😯

hmm mine will work 😕

willing to take a bit of stick for the comms feckup, had asked pharty a while back if we could switch the ts RO server for a vent one, as dazz has been paying for vent outa his own pocket.

just found this…..

A codec is a property that every channel (room) on a server has, it’s a technical word that describes what technique is used to compress the voice data before transporting it over the internet. To change the codec of a channel, you right click on it and select ‘Edit Channel’, there you can set the codec that will be used for all further communication in the selected room. Note: You will probably need administrative priviledges [server admin (SA) or channel admin (CA)] in order to change the codec of a channel.
Codecs are usually a trade-off between bandwidth usage and quality, the bandwidth usage (in KBits/sec) is part of the name of each codec that TeamSpeak offers; following we have ordered codecs by quality. Note that quality can not be measured, so the following is just the opinion of the writer of this text.

Quality: (best quality comes first)

Speex25.9 > Speex19.5 > Speex16.3 > Speex12.3 > GSM16.4 = GSM14.8 > Speex9.3 > Speex7.2 > WinCELP5.2 > Speex5.2 > CELP6.3 = CELP5.1 > Speex3.4

What codec for which internet connection?

DSL/Cable or better
For talking Speex 16.3 is easily good enough, if you want to transmit music, go Speex 25.9.

ISDN
Speex 12.3 sounds alright, limit your download to 14 KBit/s if you want to game. Speex 16.3 with download limit on 17 might also be OK.

Modem
Speex 9.3 is still quite good quality. Limit your download to 10 KBit. Note that if you want to game its way to high a setting, go as low as you can bare (Speex 5.2, or even Speex 3.4, limit your download to 6 respectivly 4).

Note:

Since codecs are a channel setting, it’s always a weakest link decision – the guy with the slowest connection decides on how low you have to set the codec.

engy 4 teh win 😆